How to Set up Philips TV
If you are not comfortable setting up the TV you might consider configuring your router instead.
- Before you start this guide you will need to find the out the IP of your router, netmask (subnet), and the IP range used by your router. All this info needs to be entered in step 5. Please see this guide to find out how to get the info needed. Once you have the info you can proceed.
- On your TV remote press the Home button on the remote
- Go to Setup
- Select Network Settings
- Select Network Settings > Network Configuration > and set to Static IP
Then select Static IP Configuration and enter the following:
IP address: Please enter a valid IP from your home network. When you follow the guides in step 1 you will be able to see the IP used by either your Mac or PC. Change the last digit. Lets say your Mac has the IP 192.168.0.10 then change the last digit to lets say 15.
Netmask: Normally you can use 255.255.255.0 - if that does not work please consult step 1 for your local info.
Gateway: The IP of your router.
DNS 1: 18.104.22.168
DNS 2: 22.214.171.124
- Restart TV