How to Block Google DNS on Roku Using Netgear

1
Make sure your DNS is set to the Unlocator DNS 185.37.37.37 and 185.37.39.39. Follow the Netgear guide here if you are in doubt
2
Go to Advanced and note down the IP of the router or look in address field of your browser. Note down the IP.
3
Go to Advanced>Advanced Setup>Static Routes
4
Set route name to blockdns1
5
Uncheck Private checkbox if available and check Active checkbox
6
Enter 8.8.8.8 as destination IP
7
Enter 255.255.255.255 in IP Subnet Mask
8
Input the IP you noted down in step 2 in the field Gateway IP Address
9
Set Metric to 2 - once finished your setup should look like this (your gateway IP might differ)
10
Click Apply
11
Please repeat the above steps for Destination IP: 8.8.4.4 as well

Important: If you get an error saying invalid gateway IP address then please try changing the last digit in the Gateway IP. 

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us