How to disable IPv6 on TP-Link router

1

Connect to your router

First, you have to connect to your router. For that, open your internet browser and go to the following address: http://tplinklogin.net/

2

Disable IPv6

Depending on the router model and firmware you are using, there are a few different interfaces. Find your interface from the menu below and follow its steps.

Interface 1

1. Go to “Advanced” and click on “IPv6” in the left menu

2. Click on the on/off toggle to disable the IPv6.

3. Click on “Save” and on “Reboot”

Interface 2

1. Go to “IPv6Setup” from the “IPv6 Support” tab in the left menu.

2. Uncheck the “Enable IPv6” checkbox and click on “Save”.

3.Go to “Reboot” from the “System Tools” tab in the left menu and click the “Reboot” button.

Interface 3

1. Go to “IPv6 WAN” from the “IPv6” tab in the left menu.

2. Uncheck the “Enable IPv6” checkbox and click on “Save”.

3. Go to “Reboot” from the “System Tools” tab in the left menu and click the “Reboot” button.