How to Set Up Unlocator VPN "PPTP" Manually on Tomato Router
First, find your Unlocator VPN account credentials
In order to set up a manual VPN connection, you need to use a server address, and your username and password found in your Unlocator account under the VPN tab.
You can locate this page by following these steps:
- Go to My Account
- Locate the VPN tab in the bottom-left corner of the page
To view your Email and Password: Choose
VPN Account Info
To view the server addresses: Choose
- Launch your web browser.
- Input your router's local IP address in the address bar. (It is usually 192.168.1.1 or 192.168.0.1).
- Input your router's login credentials when prompted.
- Go to Basic and select Network.
-Username: UnlocatorVPN Username See step 1
-Password: UnlocatorVPN Password See step 1
-Use DHCP: Check
-Subnet Mask: 255.255.255.0
-PPTP Gateway: Input the hostname or IP address of the Unlocator server you wish to connect to. servers list See step 1
-Connect mode: Keep-alive
-Check Interval: 10
-MTU: Default – 1460
- Click Save.
- Click Start Now.
You might want to keep these pages open so you could easily copy the info to be used in step 5.