How to Set UP Unlocator VPN "PPTP" Manually on Tenda Router

1
First, find your Unlocator VPN account credentials
In order to set up a manual VPN connection, you need to use a server address, and your username and password found in your Unlocator account under the VPN tab.
You can locate this page by following these steps:
  • Go to My Account
  • Locate the VPN tab in the bottom-left corner of the page
  • To view your Email and Password: Choose VPN Account Info
    To view the server addresses: Choose Servers List

    You might want to keep these pages open so you could easily copy the info to be used in step 7 and 8.

    2
    Launch your web browser. 
    3
    Input your router's local IP address in the address bar. (It is usually 192.168.1.1 or 192.168.0.1).
    4
    Input your router's login credentials when prompted.
    5
    Click on Advanced Settings.
    6
    Click on WAN Settings.
    7
    For PPTP Server Address, input the hostname or IP address of the Unlocator server you wish to connect to. servers list See step 1
    8
    Input your UnlocatorVPN credentials (email used to create your Unlocator account and the VPN password). See step 1
    9
    MTU: 1452.
    10
    For Address Mode, select Dynamic.
    11
    For the next three options, leave it set to 0.0.0.0
    12
    Enable the MPPE option.
    13
    Click OK.
    14
    Go to DNS Settings.
    15
    Select the Enable Manual DNS Assignment.
    16
    Enter the Public Google DNS or other open DNS addresses in the Primary DNS Server and Secondary DNS Server field.
    17
    Click OK.
    Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

    Still need help? Contact Us Contact Us