How to Set Up Unlocator VPN "PPTP" manually on DD-WRT Router
-
1
-
Launch your web browser.
-
2
-
Input your router's local IP address in the address bar. (It is usually 192.168.1.1, 192.168.0.1, or 192.168.1.254)
-
3
-
Input your router's login credentials when prompted.
-
4
-
Go to the Services tab, select VPN, and enable the PPTP Client.
-
5
-
For Gateway PPTP Server, Input the hostname of the Unlocator server you want to connect to.
-
6
-
For PPTP Server IP Address, input the hostname of the server you wish to connect to. The list of available servers can be found here: servers list
-
7
-
Set MTU to 1450.
-
8
-
Set MRU to 1450.
-
9
-
Enable NAT.
-
10
-
Input your UnlocatorVPN Username and Password.
-
11
-
For MPPE Encryption, input mppe required,no40,no56,stateless.
-
12
-
Click Save and Apply Settings.
-
13
-
Go to Security, and click on the Firewall tab.
-
14
-
Click Disable SPI Firewall.
-
15
-
From the Security tab, click on VPN Passthrough.
-
16
-
Enable PPTP Passthrough.
-
17
-
Click Apply Settings.
-
18
-
Click Reboot Router.
Did this answer your question?
Thanks for the feedback
There was a problem submitting your feedback. Please try again later.