How to Set Up Unlocator VPN "PPTP" manually on D-Link Router
-
1
-
Launch your web browser.
-
2
-
Input your router's local IP address in the address bar. (It is usually 192.168.1.1 or 192.168.0.1)
-
3
-
Input your router's login credentials when prompted.
-
4
-
Go to Internet, then click on Setup.
-
5
-
For Internet connection type, select PPTP.
-
6
-
For PPTP Server IP Address, input the hostname of the server you wish to connect to. The list of available servers can be found here: servers list
-
7
-
Input your UnlocatorVPN Username and Password.
-
8
-
Set Reconnect Mode to Always on.
-
9
-
Set Maximum Idle Time to 5.
-
10
-
Set your Address Mode to Dynamic IP.
-
11
-
Enter our DNS servers: 185.37.37.37 and 185.37.39.39
-
12
-
Click Save Settings, and reboot your router.
Did this answer your question?
Thanks for the feedback
There was a problem submitting your feedback. Please try again later.