How to Set Up Unlocator VPN "L2TP" manually on D-Link Router

1
Launch your web browser. 
2
Input your router's local IP address in the address bar. (It is usually 192.168.1.1 or 192.168.0.1)
3
Input your router's login credentials when prompted.
4
Go to Internet, then click on Setup.
5
For Internet connection type, select L2TP.
6
For L2TP Server IP Address, input the hostname of the server you wish to connect to. The list of available servers can be found here: servers list
7
Input your UnlocatorVPN Username and Password.
8
Set Reconnect Mode to Always on.
9
Set Maximum Idle Time to 5.
10
Set your Address Mode to Dynamic IP.
11
Enter our DNS servers: 185.37.37.37 and 185.37.39.39
12
Click Save Settings, and reboot your router.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us