How to Block Google DNS Bell 2wire Router
- Log in to the router using the Management and Diagnostic Console
- Make sure that the Primary and Secondary DNS is set to 188.8.131.52 and 184.108.40.206
- Then go to “Static Routes" under "Advanced"
- Add a static route
Subnet IP: 220.127.116.11
Subnet Mask: 255.255.255.255
Gateway IP: Any valid local IP
Remember to press “Add”
Repeat for 18.104.22.168
Did this answer your question?
Thanks for the feedback
There was a problem submitting your feedback. Please try again later.