How to Set Up Unlocator Smart VPN on an iPad
lease note that you will not get a new IP from using Smart VPN. Alternatively use our VPN apps instead. These will not only hide your IP and add encryption but also allow you to unblock all the channels supported by Smart DNS automatically.
L2TP
- 1
- Log in to your Unlocator account and go to the Smart VPN tab
- 2
- Here you will find your username and password for Smart VPN. Please note the password is different from your regular password used to log in to Unlocator.
- 3
- Open Settings
- 4
- Select General
- 5
-
Select VPN
- 6
-
Select Add VPN Configuration
- 7
- Select L2TP and enter the following details:
-
- Description: Unlocator
- Server: vpn.unlocator.com
- Account: Your account email
- RSA SecurID: Leave off
- Password: Enter your VPN password – not your regular account password. See step 1.
- Secret: smartunlocator
- Encryption Level: Auto
- Send all traffic: off ( Important!)Proxy: Off
- 8
- Save VPN Configuration.
- 9
- Press VPN top left
- 10
-
Slide VPN configuration button to connect.
- 11
- Log in to your Unlocator account and verify that you have 3 green check marks.
PPTP
- 1
- Log in to your Unlocator account and go to the Smart VPN tab
- 2
- Here you will find your username and password for Smart VPN. Please note the password is different from your regular password used to log in to Unlocator.
- 3
- Open Settings
- 4
- Select General
- 5
- Select VPN
- 6
- Select Add VPN Configuration
- 7
- Select PPTP and enter the following details:
-
- Description: Unlocator
- Server: vpn.unlocator.com
- Account: Your account email
- Password: Enter your VPN password – not your regular account password. See step 1.
- Encryption Level: Auto
- Send all traffic: Off (Important!)
- Proxy: Off
- 8
- Save VPN Configuration.
- 9
- Press VPN top left
- 10
-
Slide VPN configuration button to connect.
- 11
- Log in to your Unlocator account and verify that you have 3 green check marks.
